Ceramics
Ceramic slurries and powders requiring controlled particle formation.
Mixed-flow pressure spray drying
Mixed-Flow Pressure Spray Dryer
Mixed-flow chamber arrangement for controlled particle and moisture performance. Designed and manufactured for ceramics and ferrites and magnetic materials. Review the working principle, performance features and available configuration details below when specifying your industrial project.
- Equipment scope is selected around the feed and required finished product.
- Capacity, construction materials and utilities are confirmed during engineering.
- Final performance remains subject to material review and testing where required.
- Category
- Mixed-flow pressure spray drying
- Configuration
- Project-specific
- Selection
- Material evaluation
- Support
- Technical quotation
Product Essentials
Everything needed for a quick technical review.
Select a topic from the directory. The content stays in one focused workspace for faster comparison.
Typical Technical Data
Technical specifications
Listed values apply to the identified configuration. Confirm material conditions, utilities and optional equipment before selection.
| Parameter | Water evaporation: 6 kg/h | Water evaporation: 12.5 kg/h | Water evaporation: 25 kg/h | Water evaporation: 50 kg/h | Water evaporation: 65 kg/h | Water evaporation: 100 kg/h | Water evaporation: 150 kg/h | Water evaporation: 200 kg/h | Water evaporation: 400 kg/h | Water evaporation: 600 kg/h | Water evaporation: 800 kg/h |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Water evaporation (kg/h) | 6 | 12.5 | 25 | 50 | 65 | 100 | 150 | 200 | 400 | 600 | 800 |
| Atomization method | Low-pressure pressure nozzle | ||||||||||
| Spray pressure (MPa) | 0.6–2.5 | ||||||||||
| Heat source (optional) | Fuel oil, natural gas, coal gas, coal or electricity | ||||||||||
| Note: Water evaporation depends on feed properties, solids content and inlet/outlet air temperatures. | |||||||||||
Final equipment dimensions, utilities and performance must be confirmed before quotation.
Applications
Mixed-Flow Pressure Spray Dryer: industrial applications
Applications include ceramics and ferrites and magnetic materials. Confirm material properties and process conditions before selecting the equipment configuration.
Ferrites and magnetic materials
Magnetic-material feeds where granule flowability and moisture control are important.
Chemical and formulated powders
Other pumpable feeds after material and process evaluation.
Working Principle
From feed preparation to finished product.
The process route is selected around the material and product targets.
Performance Highlights
Process performance shaped around the product.
Final performance remains dependent on feed properties and engineering confirmation.
System Configuration
Standard process path with project-specific options.
Core equipment and auxiliary systems are selected around the process duty.
Selection Support
What we need to confirm the final design.
Share the following process information for an efficient preliminary review.
Material name and feed formRequired capacity or batch sizeInitial and final moistureParticle or product requirementsHeat and chemical sensitivityBulk density, viscosity or flowabilityAvailable utilities and heat sourceContact material and site conditions
